Raymond Grinder Mill Application

SBM Raymond Grinder Mill is applicable to the grinding and processing of more
than 280 kinds of non-flammable and non-explosive Materials(G614) with hardness lessthan 7 and humidity less than 6% in mining, construction, chemical industry andmetallurgy, such as barite, calcite, feldspar, talcum, Marble(Kashmir Gold), limeStone(Juparana Classic.), clay,glass. The fineness of the finished product can be adjusted from 100 mesh to 325 mesh according to requirements.

Raymond Grinder Mill Structural Characteristics

The whole Raymond grinder mill is of a standing structure. It features small occupying
space and strong integration capacity. It can form an independent productionsystem from the lump Materials(G614), crushing to finished powder and packaging.All the finished particles have a good uniformity of fineness, with passing screen rate as high as 98%. This is what other machine cannot reach.The Raymond grinder machine adopts electromagnetic vibrating feeder, which ensures even and regular feeding. It is easy to adjust, small in dimension, light in weight,
with lower oil and power consumption and easy to maintain.The transmission device of the main unit is equipped with a close gearbox which ensures its smooth transmission and reliable operation.Attendance of operator is not necessary in the mill operating room because the adoption of advanced central control console switch.

Raymond Grinder Mill Working Principle

The whole Raymond grinder machine is collocated with jaw crusher, elevator, hopper,
electromagnetic vibrating feeder, main unit, classifier, collector, cloth deduster
and high-pressure blower.The working principle is as follows: load the stuff for grinding evenly and continuously into the grinding chamber of the main frame. Due to the centrifugal forcein rotation, the roller swings go outward and presses closely upon the ring. The shovel carries the stuff to the space between the roller and ring. When the roller rolls, the stuff is thus grinded.After being grinded, the stuff is to be routed to the classifier along wind belt of the blower and the rough powder will be put back to the grinder for regrinding.
The fine powder flows into the cyclone collector together with air flow and is expelled
from the powder output pipe as product.In the grinding chamber, since the stuff contains moisture to some extent, the heat generated during grinding makes the moisture evaporate; since the pipeline joints are not airtight, the external air is sucked in and the circulation air massincreases. In order to enable the grinder to work in negative pressure, the increased
air flow is guided to the deuster and sequentially to the atmosphere afterpurification.

For more details about Shibang Raymond mill or Raymond grinder, please visit our website or contact us directly.